RE: NA2 with AFO
- To: alt-photo-process-l@usask.ca
- Subject: RE: NA2 with AFO
- From: EJN Photo <ejnphoto@sbcglobal.net>
- Date: Mon, 13 Nov 2006 17:34:36 -0600
- Comments: "alt-photo-process mailing list"
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=sbcglobal.net;h=Received:X-YMail-OSG:From:To:Subject:Date:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:In-Reply-To:X-MimeOLE:Thread-Index;b=tffMuySCfUAkFFpaOtP1XBr6IIrpBWXJIAwK/KYud0dMVs+N4Gd+kXPW7zsk2FjKJbcvYK+fzSt+HOT5rJ5/C/8OFsrGAbLubtjNmozpN9ES4AJ/hljgRQwNbOoywJCdXH11ZN8ihG//y7dsHN0EzDzVGYbkikB0h/4xu5MNMxQ= ;
- In-reply-to: <005101c7060b$11962d10$51a0fea9@NEWDELL>
- List-id: alt-photo-process mailing list <alt-photo-process-l@sask.usask.ca>
- Reply-to: alt-photo-process-l@usask.ca
- Thread-index: AccFlsKDGeLvw0eGQ2Sq9lwUW6X6XgAAS0XAAAgiH7AAFICeoABb/dxQ
AS promised I am sharing the results of prints made with AFO and platinic
acid. The prints made on Saturday were made with the same coating solution
but one had two drops of platinic acid @ 1%. The prints had a coating
solution of 1.0 ml of AFO and .6ml of Ammonium Palladium and .4ml of a 50/50
mix of Sodium Palladium and Potassium based Platinum. (I was making some
other 50/50 prints and just used a little of that mix.)
The prints had no discernable grain difference, but there is a color
difference. The print with boost is warmer than the print with NO boost.
They was processed in 5% disodium EDTA.
I will run a few more tests and would be careful about drawing any absolute
conclusions, but that was contrary to what one might think. And once again,
I saw no effervescence when adding the platinum acid to my solution.
Eric Neilsen Photography
4101 Commerce Street, Suite 9
Dallas, TX 75226
214-827-8301
http://ericneilsenphotography.com
Skype : ejprinter> -----Original Message-----
> From: Eric Neilsen [mailto:ejnphoto@sbcglobal.net]
> Sent: Saturday, November 11, 2006 9:32 PM
> To: alt-photo-process-l@usask.ca
> Subject: RE: NA2 with AFO
>
> Don, I made the prints with AFO, Ammonium & Sodium based
> Palladium, and
> Potassium Platinum. I'll comments on Monday how they look after
> dry down,
> but for the most part they look identical; one with two drops
> 1% platinic
> acid and one with no drops. They were printed with 1ml of AFO
> and 1ml of
> Metal salts.
>
>
>
> Eric Neilsen Photography
> 4101 Commerce Street
> Suite 9
> Dallas, TX 75226
> http://e.neilsen.home.att.net
> http://ericneilsenphotography.com
> Skype ejprinter
> > -----Original Message-----
> > From: Don Bryant [mailto:dsbryant@bellsouth.net]
> > Sent: Saturday, November 11, 2006 11:42 AM
> > To: alt-photo-process-l@usask.ca
> > Subject: NA2 with AFO
> >
> > Hi Witho,
> >
> > I specifically remember Dana Sullivan stating on the old B&S
> forum that
> > NA2
> > would not work with ziatypes. Am I confused ?
> >
> > Don Bryant
> >
> >
> >
>
>