RE: dpi for digital negatives
FWIW, I simply do a nozzle check before printing and rarely need to do a head cleaning with my 2200, knock on wood! I've never had banding problems but have had the occasional head strike if I am not careful about loading the OHP. Don Bryant -----Original Message----- From: Sandy King [mailto:sanking@clemson.edu] Sent: Monday, November 05, 2007 11:12 AM To: alt-photo-process-l@usask.ca Subject: Re: dpi for digital negatives Jon, I have to run the head cleaning often also to avoid banding. Not as much as you, but probably after every fourth or fifth negative, and always after the printer has not been used for more than a week. Sandy At 8:48 AM -0700 11/5/07, Jon Lybrook wrote: >Hi Damiano, > >On my Epson 2200 I run a head cleaning before every single digital >neg I print, and found I needed to if I wanted consistent quality. >Seems excessive, but if I skip this step I get intermittent banding >as well. I found I do not have to do a head cleaning before every >print on my 7800 (thank god). > >Best wishes, >Jon > >Damiano Bianca wrote: >>Hi!, banding problem periodically comes to visit and look for my work. >>I print with 2100 epson on Agfa jet film, setting glossy paper and 2880. >><snip...> >>When they want disappear, and I don't know why. >>
|