RE: Another banding problem

[stephen wasilewski <steve_wasilewski@yahoo.com>]

Thanks.

Sounds like a solid process.

Steve

--- On Wed, 2/25/09, Marek Matusz <marekmatusz@hotmail.com> wrote:

> From: Marek Matusz <marekmatusz@hotmail.com>
> Subject: RE: Another banding problem
> To: alt-photo-process-l@usask.ca
> Date: Wednesday, February 25, 2009, 8:17 PM
> 
> 
> 
> #yiv1688812940 .hmmessage P
> {
> margin:0px;padding:0px;}
> #yiv1688812940 {
> font-size:10pt;font-family:Verdana;}
> 
> 
>  
> Spray some non-drip widex on a few pieces of paper and
> place it under the print head for a few hours to soak
> the clogged nozzles. Sometimes an hour is good. A cleaning
> cycle should fix it. You can move the printhead freely if
> you unplug the printer while the printhead is in the middle
> of the rail like for changing cartridges.
> 
> Marek
>  
> > Date: Wed, 25 Feb 2009 15:11:23 -0800
> > From: steve_wasilewski@yahoo.com
> > Subject: Re: Another banding problem
> > To: alt-photo-process-l@usask.ca
> > 
> > Oops, forgot to attach the file.
> > 
> > --- On Wed, 2/25/09, stephen wasilewski
> <steve_wasilewski@yahoo.com> wrote:
> > 
> > > From: stephen wasilewski
> <steve_wasilewski@yahoo.com>
> > > Subject: Another banding problem
> > > To: alt-photo-process-l@usask.ca
> > > Date: Wednesday, February 25, 2009, 6:09 PM
> > > I just saw the thread on the banding
> > > problem.  I wasn't superstitious until
> today - I now
> > > have a banding problem also.
> > > My Epson 2200 had been sitting for about a
> month. 
> > > When I printed a test photo there were bands as
> you can see
> > > in the attached file.  They start on the
> left edge and
> > > are 1 inch apart.  As you progress to the
> right edge
> > > the last band is 1 1/4 inch separation from the
> preceding
> > > band.  Did I bump the carriage height? 
> > > 
> > > Any suggestions short of "get a 3800"?
> > >
> 
> It’s the same Hotmail®. If by “same” you
> mean up to 70% faster.  Get
> your account now.  
> 
>