U of S | Mailing List Archive | alt-photo-process-l | Re: haunted VDB

Re: haunted VDB

I "develop" in plain water for 5 minutes and fix.
I don't change the water during development. Should I?

On 30/09/2009, at 10:20, Loris Medici wrote:

Forgot to add this between 1 and 2:
- Wash in plain water for further 4-5 minutes, chaning water at least 4

BTW, I was chaning fixer every 3 prints since it was very diluted...

-----Original Message-----
From: Loris Medici [mailto:mail@loris.medici.name]
Sent: Wednesday, September 30, 2009 4:00 PM
To: 'alt-photo-process-l@usask.ca'
Subject: RE: haunted VDB

Are the prints also fading along with changing color? If they're also fading
I'd suspect the porfolio and/or a mistake in processing. Have you cleared
and washed well the prints? Do you notice a yellow stain (most notably when
looking under a bluish fluorescent light?

See my procedure below:
1. Wash 2 mins in 2 separate baths of dilute citric acid (a dessert spoon to
2000ml water)
2. Gold tone (optional)
3. Fix for 2 mins. in 2% plain sodium thiosulfate
4. Wash for 15 minutes chaning water at least 5 times.

No problems with untoned (yet!) and toned prints as old as 6 years so far...

-----Original Message-----
From: Joao Ribeiro Globo [mailto:ribeiro.joao@globo.com]
Sent: Wednesday, September 30, 2009 3:56 PM
To: alt-photo-process-l@usask.ca
Subject: Re: haunted VDB

Hi Cor,

No treatment other than normal processing and washing.


On 30/09/2009, at 09:46, C.Breukel@lumc.nl wrote:


Did you gold tone them?


-----Original Message-----
From: Joao Ribeiro Globo [mailto:ribeiro.joao@globo.com]
Sent: woensdag 30 september 2009 14:32
To: alt-photo-process-l@usask.ca
Subject: haunted VDB

Hi Folks

After printing really brown prints with traditional formula on arches
aquarelle and archiving them in a portfolio, some prints changed from
brown to gray.
They were perfect 20 days before.
Does anyone know what might be happening?

Thanks in advance,

Joao Ribeiro
(11) 9607-2106