[alt-photo] Re: DESICCATE! DESICCATE! DANCE TO THE MUSIC!

Wed Jul 28 14:12:05 GMT 2010

Sorry, a typo.  I was just wondering whether I could use PDN to create a
driver(Right word?) curve to instruct my Epson 3800 (from a PC) how to print
a better inkjet print than just calibrating my monitor and hoping the
factory instructions tell the Printer how to lay the inks down.  When I do
an inkjet print, my printer always prints considerably darker than it looks
on the monitor (not just because of light from a monitor is brighter than
pigments laid down on a print and reflected into my eye). My wife, who uses
an Epson 4800 downstairs does not have this problem. So I guess and
compensate by creating a monitor image lighter than what I want.  I've
gotten pretty good at it, but could PDN do better?

Sorry about getting off the alt-process topic.  Thanks for the helpful
comments.
Alan

-----Original Message-----
From: alt-photo-process-list-bounces at lists.altphotolist.org
[mailto:alt-photo-process-list-bounces at lists.altphotolist.org] On Behalf Of
Paul Viapiano
Sent: Wednesday, July 28, 2010 12:38 AM
To: The alternative photographic processes mailing list
Subject: [alt-photo] Re: DESICCATE! DESICCATE! DANCE TO THE MUSIC!

I figured such, Jim...

PDN is inkjet only, because it involves using ink color to block light (UV 
density).

----- Original Message ----- 
From: "Jim Larimer" <jrlarimer at gmail.com>
To: "The alternative photographic processes mailing list" 
<alt-photo-process-list at lists.altphotolist.org>
Sent: Tuesday, July 27, 2010 9:18 PM
Subject: [alt-photo] Re: DESICCATE! DESICCATE! DANCE TO THE MUSIC!

Hi, Paul...I am the "Facebook Jim" that responded to a question from Alan
about whether I used PDN or QTR. I make my gum prints using laser
transparencies and knew that QTR was meant for ink jet printers. But, did
not realize that Mark's PDN applied to laser printer output. (I am going to
look into this some more). I don't think that I would have referred to ink
jet laser prints. At least I hope that I didn't ;o)
Jim

On Tue, Jul 27, 2010 at 7:09 PM, Paul Viapiano <viapiano at pacbell.net> wrote:

> QTR is a piece of software that helps you print a B&W inkjet print and
> gives you total control over inks, densities, etc. It is also used to 
> print
> inkjet negatives on transparency materials for alt and silver printing,
> precisely because it gives you control over how the ink gets laid down on
> the negative.
>
> PDN is a system for creating a curve for any process AND outputting the
> resulting negative on a substrate. PDN is a complete system for making
> digital negs while QTR is just a tool for output.
>
> I think that's a decent nutshell version, not complete, but nutshell...
>
> But inkjet laser? It's either an inkjet print or its a laser print. 
> They're
> not the same...
>
>
>
>
> ----- Original Message ----- From: "Alan MacKellar" <amackellar at qx.net>
> To: "'The alternative photographic processes mailing list'" <
> alt-photo-process-list at lists.altphotolist.org>
> Sent: Tuesday, July 27, 2010 4:43 PM
>
> Subject: [alt-photo] Re: DESICCATE! DESICCATE! DANCE TO THE MUSIC!
>
>
> Jim (a facebook friend) just answered my question about whether he had
> tried
> QTR or PDN for Pt/Pd or gum printing by saying he thought it was only used
> by those who did ink jet laser printing.  I never thought of that.  Could
> it
> work?  I am working on Pt/Pd and next week my wife, Rene, and I will be
> spending our time in MT with Chris, learning how to do tricolor gum.
> Alan
>
> -----Original Message-----
> From: alt-photo-process-list-bounces at lists.altphotolist.org
> [mailto:alt-photo-process-list-bounces at lists.altphotolist.org] On Behalf
> Of
> Michel Debar
> Sent: Tuesday, July 27, 2010 3:55 AM
> To: The alternative photographic processes mailing list
> Subject: [alt-photo] Re: DESICCATE! DESICCATE! DANCE TO THE MUSIC!
>
> If my memory is correct, the advice I received about this is to use double
> containers, to minimize air pressure exchanges (they may bring in
> moisture),
> that do happen even with what one thinks are air-tight bags.
>
> 2010/7/27 John Brewer <john at johnbrewerphotography.com>
>
>  Hi Bob,
>>
>> I would repack it in smaller quantities and seal the smaller containers.
>> When I buy FAC now I get it repacked into manageable sizes now.
>>
>> Best wishes from wet Manchester UK,
>>
>> J.
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: alt-photo-process-list-bounces at lists.altphotolist.org
>> [mailto:alt-photo-process-list-bounces at lists.altphotolist.org] On Behalf
>> Of
>> BOB KISS
>> Sent: 27 July 2010 00:03
>> To: 'The alternative photographic processes mailing list'
>> Subject: [alt-photo] DESICCATE! DESICCATE! DANCE TO THE MUSIC!
>>
>> DEAR LIST,
>>
>>           I just received my 1 lb white plastic jar of Ammonium
>> Thiocyanate to use in my gold toners for salt and albumen prints.  I will
>> be
>> keeping it in my a/c darkroom which maintains about 50% rh and 75 F.  We
>> all
>> know that, once I open it, even in those conditions, it is so hydroscopic
>> that I will soon have a jar with solution with some xtals at the bottom.
>> Sooooooooooooooooooo, my question is, how do I keep it *dry* and 
>> powdered?
>>
>>           My first idea is to keep it in a zip lock baggie with some
>> silica gel packs around it.  I would "regenerate" them every time I open
>> the
>> bag.  Will this do it or does anyone know a better way?
>>
>>           Please don't suggest other options for this agent like
>> carbonates or others.I want to know the best way to maintain *this*
>> chemical.
>>
>>                       CHEERS!
>>
>>                                   BOB
>>
>>
>>
>>  Please check my website:  <http://www.bobkiss.com/>
>> http://www.bobkiss.com/
>>
>>
>>
>>
>> "Live as if you are going to die tomorrow.  Learn as if you are going to
>> live forever".  Mahatma Gandhi
>>
>> _______________________________________________
>> Alt-photo-process-list | http://altphotolist.org/listinfo
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.851 / Virus Database: 271.1.1/3028 - Release Date: 07/26/10
>> 07:36:00
>>
>> No virus found in this outgoing message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.851 / Virus Database: 271.1.1/3028 - Release Date: 07/26/10
>> 07:36:00
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.851 / Virus Database: 271.1.1/3029 - Release Date: 07/26/10
>> 07:36:00
>>
>> _______________________________________________
>> Alt-photo-process-list | http://altphotolist.org/listinfo
>>
>>
>>
>
> --
> Michel Debar
> 11, chemin du Fort Saint-Héribert
> 5100 Wépion Belgique
>
> Tél. +32 (081) 4612 04 - +32 (0485) 72 83 92
> _______________________________________________
> Alt-photo-process-list | http://altphotolist.org/listinfo
>
>
> _______________________________________________
> Alt-photo-process-list | http://altphotolist.org/listinfo
> _______________________________________________
> Alt-photo-process-list | http://altphotolist.org/listinfo
>
_______________________________________________
Alt-photo-process-list | http://altphotolist.org/listinfo 

_______________________________________________
Alt-photo-process-list | http://altphotolist.org/listinfo