[alt-photo] Re: Re : Re: UV light for cyanotypes

Sarah McKemie mckemie_sarah at yahoo.com
Mon Feb 27 03:11:52 GMT 2012


Hi Rodrigo, 

I would like to create a uv cyanotype set up to use this bulb, could you help advise me on how to to this?
I really have no idea on setting up lighting stuff for the uv and I want to do it properly.
If you can advise me I would be grateful.
Let me know if you might have time to help me.

I would like to use the sun, but I teach a night class.

-Sarah 

feel free to call as well, 918-808-5962

________________________________
 From: ding dangdong <dingedangedonge at yahoo.fr>
To: The alternative photographic processes mailing list <alt-photo-process-list at lists.altphotolist.org> 
Sent: Wednesday, February 22, 2012 11:22 AM
Subject: [alt-photo] Re :  Re: UV light for cyanotypes
 
Whoaa! 93usd a bulb now! 
I'm so glad i followed my instincts back in 2007and bought 4 more of this after receiving my original purchase of 2 in a destockage sale. I paid 30euros per bulb. 


For me, this setup is ideal because of its convenience, efficiency and most of all--it doesn't take me more than 20 minutes to rig it up before i can start printing.  Its just basic wiring and no ballast. (just make sure though that you get the suitable E27 receptacle for 300watts). 

Variables in exposure time is still the same with other light sources. Bulb distance to frame and chemistry dilution. Right now, my standard rig is two bulbs suspended with a 40 cm distance to print frame. It prints 8x10 easily without light fall-off. When i print bigger, i just add two more bulbs (total 1200watts) to avoid fall-off and i cut my exposure time in about half. My standard exposure time for cyanotypes traditional  mix is between 6 and 9 minutes with the variation dependent on the final process i have in mind, straight cyanos or gum over cyano. 


Rodrigo  



________________________________
De : Tomas Sobota <tom at sobota.net>
À : The alternative photographic processes mailing list <alt-photo-process-list at lists.altphotolist.org> 
Envoyé le : Mercredi 22 février 2012 17h04
Objet : [alt-photo] Re: UV light for cyanotypes

Sarah,

Before building a UV box, I used this sun tan lamp:

http://www.google.com/products/catalog?client=ubuntu&channel=fs&q=osram+UV+lights&oe=utf-8&um=1&ie=UTF-8&tbm=shop&cid=14478487383285518444&sa=X&ei=Dg5FT7-OLo-4hAfFmJ37AQ&ved=0CGQQ8wIwBA

(also here:)
http://www.bulbtronics.com/Search-The-Warehouse/ProductDetail.aspx?sid=0013779&pid=OSULTRAVITALUX&AspxAutoDetectCookieSupport=1

It will cost you around US$ 100, and it works fine for medium-sized prints.
Also, it has an advertised lifetime of 5000 hours, I never managed to burn
one.

When you turn on this lamp you have to wait around a minute until the UV
output stabilizes. You will notice this because the light turns to a
greenish hue (avoid looking directly into the lamp, obviously). Then you
make the exposition. After turning the lamp off, you have to wait until it
cools down before turning it on again. If doing several prints, you just
leave it on between exposures.

Tom

On Wed, Feb 22, 2012 at 4:38 PM, Diana Bloomfield <
dhbloomfield at bellsouth.net> wrote:

> Hey Sarah,
>
> I have no idea about James' suggestion, and you're probably in more of a
> rush to get something done sooner rather than later-- but I'm sure your
> community college offers an associates degree in some field (electrical
> engineering maybe? Design? Woodworking?), that you could use for your
> purposes.  Not that you need a degree in electrical engineering, but you
> could approach an instructor and ask if he/she would offer that up as a
> group project.  They could maybe make you a large UV light-box, for larger
> classes and longer term.  Before I started using a vacuum print frame, my
> husband made me one, which was really based on a smaller one that I'd
> purchased, but didn't like for various reasons.  Anyway,  I think if you
> commissioned for something that would accommodate your classes and that
> would last long-term, that seems like a worthwhile integrated approach to
> learning, and everyone gets something out of it.
>
> Again, I'm sure you're up for something sooner that that, but it's a
> thought for longer-term.
>
> Diana
>
> On Feb 22, 2012, at 10:16 AM, Sarah McKemie wrote:
>
> > Hi there,
> >
> > I am a traditional printer and am just starting to scrape the surface of
> alt. process.
> > I teach a intro and advanced darkroom class at a community college and
> would like to try doing cyanotype's with my adv. class.
> > To give them (and myself) an introduction to cyanotypes.
> > However, our class is at night,  so I will need a uv source.
> >
> >
> > I do not feel confident to make one with wiring, etc. Nor do I have time
> right now.
> > I would like to buy something affordable.
> > In Christopher James, Alternative Processes book, he recommends
> "1000-Watt Metal Halide Maximizer Grow Light System", from
> www.hydroponics.net, and he says it is about $250.  Would this be my best
> affodrable bet, or is something cheaper?
> >
> > Do you have any ideas?
> > _______________________________________________
> > Alt-photo-process-list | http://altphotolist.org/listinfo
>
> _______________________________________________
> Alt-photo-process-list | http://altphotolist.org/listinfo
>
_______________________________________________
Alt-photo-process-list | http://altphotolist.org/listinfo
_______________________________________________
Alt-photo-process-list | http://altphotolist.org/listinfo


More information about the Alt-photo-process-list mailing list