Ender100@aol.com
Date: 07/30/02-08:53:20 PM Z
Or use emulsion or gum image as a resist in much the same manner and acid
etch or color the metal?
Mark Nelson
In a message dated 7/30/02 12:14:52 PM, galina@online.no writes:
<< How about sandblasting over a direct silkscreen emulsion ?
Use either positive or negative image of high contrast or raster.
Put silkscreen emulsion onto a metal plate, dry, expose, wash. Dry and
expose once more to harden the surface.
Use this as a resist for sandblasting. One can polish a surface in different
manners before applying the emulsion, so the result is two different
surfaces on metal, no color. Very good-looking ! >>
This archive was generated by hypermail 2.1.5 : 09/19/02-11:11:01 AM Z CST