FDanB@aol.com
Date: 02/09/03-01:59:12 PM Z
Jacques said in his message...
>Converting back to grayscale resulted in the changed values in grayscale.
>In order to calibrate and apply curves to images is it advisable to print
>the grayscale image as an RGB file on a desktop printer?
Color Management is messing with your values. Note: Color Management is
generally a good thing...but when it changes your step tablet densities
you will have a more difficult time using the printed step tablet as a
diagnostic tool for creating new curves, etc.
Though there are several ways to prevent the mode-change tone shift, you
might just want to strip off the image profile (Image>Mode>Assign
Profile>Do Not Color Manage). Then when you change modes you won't see
values in your image change.
About printing grayscale or RGB: if you are making the red/orange
spectral density negs, you must print as RGB (how else could you get the
color!). If you are making neutral color negs, you can print a grayscale
image. For either type you usually want to select COLOR in the print
dialog box so all ink nozzles spray.
Hope this helps!
Dan
This archive was generated by hypermail 2.1.5 : 03/04/03-09:19:08 AM Z CST