RE: Re: Print Clear Print on right side.

From: Loris Medici ^lt;loris_medici@mynet.com>
Date: 02/28/05-07:41:33 AM Z
Message-id: <001e01c51d9b$3819d2c0$ce02500a@altinyildiz.boyner>

Another check: one can print on the concave side. I first determine the
concave side then do the wet finger test - to save time and also to save
precious saliva ;)

Regards,
Loris.

> -----Original Message-----
> From: res1dvao@verizon.net [mailto:res1dvao@verizon.net]
> Sent: Monday, February 28, 2005 3:32 PM
> To: alt-photo-process-l@sask.usask.ca;
> alt-photo-process-l@sask.usask.ca
> Subject: Re: Re: Print Clear Print on right side.
>
>
> I have never bought any with the white strip. It must be the
> way they cut it down.
>
> And I now "lick n' stick' every time.
>
> George
> >
> > From: "Christina Z. Anderson" <zphoto@bellsouth.net>
> > Date: 2005/02/28 Mon AM 04:50:07 GMT
> > To: alt-photo-process-l@sask.usask.ca
> > Subject: Re: Print Clear Print on right side.
> >
> > Yup; been there, done that. I always "lick n' stick"--wet
> my finger
> > and see
> > if it sticks on the side I load into the printer.
> > It's odd, some of the OHP has the white strip, some don't .
> Not that the
> > white strip would prevent loading wrong...but at least you
> know the edge of
> > it is on the wrong side.
> > Chris
> > ----- Original Message -----
> > From: "Sandy King" <sanking@clemson.edu>
> > To: <alt-photo-process-l@sask.usask.ca>
> > Sent: Sunday, February 27, 2005 10:22 PM
> > Subject: Print Clear Print on right side.
> >
> >
> > > In the unlikely event there are other retarded
> photographers on this
> > > list
> > > a word of advice. If you use the Photo Warehouse
> Clearprint OHP always
> > > double check and triple check before running it through
> your Epson 2200.
> > >
> > > Gee Gawd, I printed a negative earlier this evening on the wrong
> > > side and
> > > it took me the better part of two hours to clean the
> printers from all of
> > > the dripping green ink. And even after I thought it was
> clean the next
> > > negative through had some light banding.
> > >
> > > I imagine that Pictorico would be about as bad if printed on the
> > > wrong
> > > side, but at least with it, and the Epson OHP, you have
> this nice little
> > > nick at the upper right corner that serves to orient it
> correctly in the
> > > printer.
> > >
> > > Sandy
Received on Mon Feb 28 07:47:17 2005

This archive was generated by hypermail 2.1.8 : 03/01/05-02:06:55 PM Z CST