Re: km73 plate with finer stochastic screen

[Jon Lybrook <jon@terabear.com>]

Thanks Jack,

If you or anyone finds any inconsistencies, typos or things they 
consider to be downright wrong with my procedure, please email me directly.

Best wishes,
Jon

Jack Fulton wrote:
> Very well done and the about the most informative so far.
> jack Fulton
>
>
> On April2007, at 11:24 PM, Jon Lybrook wrote:
>
> > Hi All,
> >
> > Here's a scan of an intaglio print I made today using the 1800 dpi 
> > stochastic screen, side-by-side with a scan of the original silver 
> > print.  This is using the 2nd iteration of the compensation curve 
> > I've been developing for my workflow with the 7800.  Not without room 
> > for improvement, but getting close!  No adjustments were made to the 
> > 16bit RGB scan of the intaglio print, other than converting it to 
> > jpg.  Auto-adjust was turned off in the scanner settings.
> >
> > Please let me know what you think, and if you have any questions not 
> > already addressed in my on-line procedure.
> >
> > Comparison:  http://terrabear.com/procedures/comparison.html
> >
> > Procedure:  http://terrabear.com/procedures/polymer_photogravure.html
> >
> > Thanks!
> > Jon