Re: VDB
Sandy, who's green Ammonium Iron(III) Citrate do you use? Not B&S's I
presume - because mine from B&S does indeed cause sludge formation
right after mixing the sensitizer. I leave it there for two days
ripening period (occasionally shaking the bottle, 2 - 3 times a day)
then filter it out before using the sensitizer. A little more sludge
precipitates even after that but since the amnt. is not important (a
mm or so precipitation in the bottom of the 250ml bottle) I leave it
there and take the sensitizer with a plastic pipette w/o disturbing it.
I'm happy with my single coat Vandykes as long as I tone them with
thiourea-gold toner. I'm not happy with my untoned Vandykes unless I
double coat.
Regards,
Loris.
Quoting Sandy King <sanking@clemson.edu>:
I never get any sludge!! Not after 24 hours, not after 24 days.
After several months the silver coats the side of the bottle, but the
solution remains clear.
Are you mixing with distilled water?
Sandy
At 2:44 PM -0500 11/4/07, Weber, Scott B wrote:
Speaking with a friend who also makes Van Dyke prints I mentioned that I
filter the "sludge" that forms at the bottom of the bottle after 24 hours
when mixing a new batch of solution. He said that he never does this. Are
there any VDB printers out there with opinions on this? Filter or no filter?
Scott B. Weber
Associate Professor of Photography
Department of Fine Arts
Barry University
11300 NE 2nd Avenue
Miami Shores, Florida 33161
(305) 899 4922
The information
transmitted is intended only for the person or entity to which it
is addressed and may contain confidential, and/or privileged
material. No confidentiality or privilege is waived or lost by any
errant transmission. If you receive this message in error, please
immediately delete it and all copies of it from your system and
notify the sender. E-mail transmission cannot be guaranteed to be
secure or error-free as information could be intercepted,
corrupted, lost, destroyed, arrive late or incomplete, or contain
viruses.
Barry University - Miami Shores, FL (http://www.barry.edu)
- Follow-Ups:
- Re: VDB
- From: Gordon Holtslander <gordon.holtslander@usask.ca>
- Re: VDB
- From: david drake <daviddrakephoto@sympatico.ca>
- Re: VDB
- From: Sandy King <sanking@clemson.edu>
- Re: VDB
- From: Loris Medici <mail@loris.medici.name>
- References:
- VDB
- From: "Weber, Scott B" <sweber@mail.barry.edu>
- Re: VDB
- From: Sandy King <sanking@clemson.edu>
|