[alt-photo] Re: Sulfite + Na4.EDTA clearing bath quick kitchen formula?

[Loris Medici]

Ok, thanks much Philippe. I'll try both later...

Regards,
Loris.


24 Şubat 2012 10:09 tarihinde Philippe Ayral <payral at gmail.com> yazdı:
> No. As it works well for me I didn't try anything else.
> I use citric acid alone when I print on Crane Cover. (not made any more)
>
> 2012/2/24 Loris Medici <mail at loris.medici.name>:
>> Thanks Philippe!
>>
>> Out of curiosity, I found a formula that says:
>>
>> 2 Tbsp Na4.EDTA
>> 1 Tbsp citric acid
>> 1 Tbsp sodium sulfite
>>
>> The EDTA:sulfite proportions are reversed here, I guess it's not
>> critical - as long as they're together. Do you have any experience
>> with a formula similar to the above?
>>
>> Regards,
>> Loris.
>>
>>
>> 23 Şubat 2012 14:36 tarihinde Philippe Ayral <payral at gmail.com> yazdı:
>>> In my work I use 20g sodium sulfite per liter (should be a heaping
>>> dessert spoon) plus a half one for EDTA.
>>> It works for Arche Platine.
>>>
>>> 2012/2/23 Loris Medici <mail at loris.medici.name>:
>>>> Anyone with a quick kitchen formula for sodium sulfite + tetrasodium
>>>> EDTA clearing bath for pt/pd? (I mean something like: 2 dessert spoon
>>>> sulfite + 2 dessert spoon EDTA into 1000ml water...)