[alt-photo] Re: taking a scalpel to pt/pd spots

[Kerik Kouklis]

I was never able to get good results with the Chinese white approach. I
could always see it.

I etch small black spots all the time. I've done the chemical approach that
Clay referred to, but if it's a small spot and on or near the surface of the
paper, for me it's much easier to use a fresh Exacto knife blade and gently
etch away until the spot is gone. I find using a loupe very helpful during
the surgery to prevent yourself from cutting too deep.

As usual, practice on your reject prints first.

-Kerik


> -----Original Message-----
> From: alt-photo-process-list-bounces at lists.altphotolist.org [mailto:alt-
> photo-process-list-bounces at lists.altphotolist.org] On Behalf Of Paul
> Viapiano
> Sent: Sunday, February 17, 2013 1:03 PM
> To: The alternative photographic processes mailing list
> Subject: [alt-photo] Re: taking a scalpel to pt/pd spots
> 
> Spotting with Chinese white and then spotting with the appropriate color
is a
> good alternative to knifing.
> 
> P
> 
> On Feb 17, 2013, at 12:45 PM, Diana Bloomfield
> <dhbloomfield at bellsouth.net> wrote:
> 
> > Sorry-- that got sent before I meant for it to-- so he asked me about
those
> spots-- and, typically, I just try not to get them-- I've never cut one
out.  So
> the question is-- do people actually do that, and if so-- any pointers I
can pass
> along?
> >
> > Thanks.
> >
> > Diana
> > _______________________________________________
> > Alt-photo-process-list | http://altphotolist.org/listinfo
> _______________________________________________
> Alt-photo-process-list | http://altphotolist.org/listinfo