Hans Oosterom (hans.oosterom@wxs.nl)
Mon, 18 Jan 1999 22:53:21 -0100
Hi Judi,
No, a laserjet is the name of a series of laserprinters devloped by HP, but using
the Canon machinery in it.
The 4P has 600dpi; the 5MP has 600 dpi and 'gray enhancement' and RET which is a
method of correcting the ugly rectangulars at the borders. The 5MP is printing at a
maximum of 133dpl and has a range 122 levels of gray.
The problem with both toner as ink are, that if you are trying to put a thicker
amount within a very small dot, it will run to the sides. The effect is always
stronger on a harder paper as on a paper that soaks. Acetate taking up nothing at
all, you can guess the effect. Therefor the special transparencies for inkjet are a
kind of frosted, by that enlarging the effective surface on a square whatever size,
just like the mountains give a country a larger amount of 'soil'.
Calque paper is that is either transparent and either opaque, used mostly in the
cartography world the other days. It now exists in a paper version and a kind of
nylon version. The latter likes very much the toner that is for 80% a kind of
plastic as well and it does resist well to the heat of the fuser.
One color at a time, that finally ads up to four days for a, can I say print???
Of course a stupid question as well for you.
The waxed paper is that a print from a laser printer on which fishoil is used to
give the idea of transparency for the UV??
The solution is to use a ink within a inkjetprinter that is blocking the UV. As I
think about the thin layer I'm putting on my skin and that is really an UV blocker,
a small amount hence a thin film should be enough......
Who is going to try out whether the sunburn oil is THE solution for dig prints???
Hans
This archive was generated by hypermail 2.0b3 on Sat Nov 06 1999 - 10:06:42