Re: Lens flange question/request

Date view Thread view Subject view Author view

From: terry roth (terryroth@earthlink.net)
Date: 06/01/00-01:20:33 PM Z

----- Original Message -----
From: Richard Knoppow <dickburk@ix.netcom.com>
To: <alt-photo-process-l@skyway.usask.ca>
Sent: Tuesday, May 30, 2000 4:43 PM
Subject: Re: Lens flange question/request

> At 06:00 PM 05/30/2000 -0400, you wrote:
> >Eugene:
> > You might consider mounting a heavy lens on an aluminum lensboard.
Any
> >machine shop can make one to your specs, and can thread the board
directly,
> >thus alleviating any

I have an iris lens board, will open to about 3 inch diameter, it's on an
aluminum board which is 5x6 1/4 inches.
Will hold pretty heavy lens. It is surplus for me, want it?

Terry

Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : 07/14/00-09:46:43 AM Z CST