Re: Re: digital gum negatives (was: Re: Shooting for Alternative Processes)

Date view Thread view Subject view Author view

Smieglitz@aol.com
Date: 07/04/01-12:35:02 PM Z

In a message dated 07/04/2001 13:57:04, lrryr@home.com wrote:

<<Joe,

I used your curve this morning and succesfully made a gum print of my

daughter, now I'm motivated, thanks for the kick in the pants! I dont think

you mentioned what you used but my piezo driver was set to the 'unsupported'

setting....

Thanks,

Larry

>>

Hi Larry.

Glad I could help. Nice to know the curve is working for others as well. As
far as the piezo driver setting, I was using the "Epson glossy paper setting"
(which I think is the same as the default "unsupported" setting). I believe
it is where Cone starts his calibrations for media with unknown printing
characteristics. Sorry for the oversight.

Any chance you could fill me in on the other variables (transparency
material, pigment, paper, etc.) and perhaps email a pic if you scan one? Are
you using an 1160 as well?

Thanks,

Joe

Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 08/02/01-11:56:46 AM Z CST