RE: large ink-jet printers

Date view Thread view Subject view Author view

From: Larry Roohr (lrryr@home.com)
Date: 11/09/01-08:46:06 AM Z


Nick,

You need to apply a clear spray over the ink on pictorico, Krylon Crystal
Clear Acrylic works well and is cheap.

Does the FS quadtone dry as well as the piezo ink?

Larry

-----Original Message-----
From: Nick Makris [mailto:nick@mcn.org]
Sent: Friday, November 09, 2001 7:11 AM
To: alt-photo-process-l@skyway.usask.ca
Subject: Re: large ink-jet printers

Kees, Gord and all,

Well, this is like dejavu dejavu. I have just begun to test Pictorico on an
1160 with MIS Full Spectrum Quadtone inks. It appears to be a NO GO and I
have a call into Pictorico tech support. The ink appears to dry ok,
however, it just sits on the film and if you barely touch it, the image gets
scratched. I have the Piezography system and I have given up on the
associated inks. I believe both inks are pigment based - I'm guessing, but
apparently dye based will sink in, but the pigments sit on the surface.
More to follow on this one.

I have been recieving the Epson list post for a couple of months now and
people rave about the large sizes and quality of the images produced by the
5000 through 9500 model Epson printers. I think you could pass a billboard
through one of these models.

Also, I just emailed Dan B and he's on vacation.

Nick

----- Original Message -----
From: "Kees Brandenburg" <info@co-web.org>
To: <alt-photo-process-l@skyway.usask.ca>
Sent: Thursday, November 08, 2001 11:47 PM
Subject: Re: large ink-jet printers

> Hi
> Pictorico sells rolls of their Premium OHP Transparency Film, Size:
> 17" width (66' length, 2" core)
>
> http://www.pictorico.com/roll.asp
>
> Never used pictorico though. I'm wondering if someone tried this
> 'film' with my setup which is: MIS FS and/or PiezoBW quad black inks
> in an epson 1160. Will the MIS inks give good results on this
> pictorico film?
> I'm hesitating ordering because pictorico is not availeable in
> Europe. For the moment I'm using Schoellershammer #6
> inkjettranparancies (max. A3) or Epson photo quality inkjet paper
> (max. A2) for my negatives.
> thanks,
>
> Kees
>
>
>
>
>
>
> >Hi:
> >
> >This is a digital alt-photo question really ... :)
> >
> >Our department is considering buying a large inkjet printer. The kind
> >that does at least a three foot wide output.
> >
> >Its primary purpose will be to make posters for scientific conferences.
> >It could also be used to make very large digital negatives :)
> >
> >How large can one get good transparency stock?
> >
> >Does anyone have any experience with these. I'm being asked to help
> >determine what should we should buy.
> >
> >Please reply to me offline. I'll summarize my findings back to the list.
> >
> >Thanks
> >
> >Gord
> >---------------------------------------------------------
> >Gordon J. Holtslander Dept. of Biology
> >holtsg@duke.usask.ca 112 Science Place
> >http://duke.usask.ca/~holtsg University of Saskatchewan
> >Tel (306) 966-4433 Saskatoon, Saskatchewan
> >Fax (306) 966-4461 Canada S7N 5E2
> >---------------------------------------------------------
>
>
> --
>


Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 12/10/01-11:12:21 AM Z CST