Re: contact printing frames

Date view Thread view Subject view Author view

From: Gary Beasley (beasleyglb@mindspring.com)
Date: 09/24/01-02:37:04 PM Z


At 09:17 PM 9/23/01 -0400, you wrote:
>on 9/23/01 5:52 PM, bmaxey1@juno.com at bmaxey1@juno.com wrote:
>
> > You can also make your own. I do.
> >
> > HCM
>
>what do you use for the spring latches?
>
>to

The Gravity Works frame I got uses big rubber bands hooked on the outside
to hold the back in place. The back blocks are about a quarter inch thicker
than the frame so it catches a decent amount of pressure when lashed down.


Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 10/01/01-01:41:32 PM Z CST