From: shannon stoney (sstoney@pdq.net)
Date: 04/12/02-06:42:54 AM Z
Bob wrote:
>I have been using this printer since it came on the market. I have
>two machines, one at work and the other in my studio (newer machine)
>On the rare ocasion that I had difficulty it was banding and I went
>through the steps of a nozzel check and head alignment. That solved
>the problem. I read somewhere that this machine should be used at
>least every two weeks. Mine have never been idle for more than a
>week. The color balence is very sensitive to the type of paper so
>make sure all your settings are correct before printing. Do not
>assume that the settings will remain the same until you change them
>as they have a tendency to revert to the original settings between
>printing sessions, at least that is the case with the two systems I
>use.
Are you printing on film? I did the nozzle check and head alignment,
and I use the settings on Dan's web page.
--shannon
>
>Bob Schramm
>
>
>Check out my web page at:
>
>http://www.SchrammStudio.com
>also look at:
>http://www.wlsc.wvnet.edu/www/pubrel/photo.html
>
>
>Chat with friends online, try MSN Messenger:
><http://g.msn.com/1HM505401/12>Click Here
--
This archive was generated by hypermail 2b30 : 05/01/02-11:43:29 AM Z CST