Re: flatbed scanner

About this list Date view Thread view Subject view Author view

From: Ken Watson (watsok@frii.com)
Date: 12/24/02-09:01:56 AM Z


Judy,

Generally it is always OK to leave electronics on. The only typical thing
that shortens the life of semiconductors is heat. When in sleep mode the
lamp and motor ( two of the biggest power consumers and heat generators) are
in standby so nothing much else is an issue.

>From a long term point of view, once electronic components get past what is
known as infant mortality, they last forever or at least for the next three
years when it is time to get the new stuff.

Possibly the one thing that can damage things is static electricity. So
when you zap yourself on some electronic gear, you never know if it has
injured it a little. If it kills it , it is more obvious.
----- Original Message -----
From: "Judy Seigel" <jseigel@panix.com>
To: <alt-photo-process-l@skyway.usask.ca>
Sent: Tuesday, December 24, 2002 12:59 AM
Subject: flatbed scanner

> Hello again...
>
> With all the computer grief I've been having, the one piece of equipment
> plugging politely away is the Umax powerlook 2000 XL. The bed is about 12
> by 17 inches, and transparency adapter gives same size. I realize not the
> resolution of the Epson just under discussion, but fine for my purposes --
> when I scan a larger neg it doesn't have to be enlarged so much.
>
> But today i heard about someone had the same scanner that died. So here's
> my question: For convenience, since it IS slow to start, I leave it on
> for days while I'm working in that mode. I was told this is OK to do, the
> light goes out & everything does sleep mode. But now I'm wondering --
> which is harder on the insides-- on/off or stay on? Or is that a question
> could only be answered by double-blind study of 42,000 scanners?
>
> Anyway, thought I'd ask...
>
> J.
>
>


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2.1.5 : 01/31/03-09:31:26 AM Z CST