Re: UV probe for Metrolux II

About this list Date view Thread view Subject view Author view

From: Sandy King (sanking@clemson.edu)
Date: 11/17/02-09:23:55 PM Z


What you say about Redlight not offering another probe for UV
surprises me. I have a second UV probe for the Metrolux and thought
that it was purchased through Redlight. I will have to review my
records and try to determine where I bought the UV probe.

As for the second question, I think most of the Olec units will work
with the BL tubes. You have to be concerned about total wattage of
course since the integrator will be rated for a maximum wattage.
However, in the case of the Olec AI 131, which was only rated for
about 200 watts, I connected a relay that allows me to use a 1000
watt bulb.

Sandy

As

>Sandy King wrote:
>
>
>Another good light integrator is the Metrolux II, which is a light
>>>integrator sold for enlargers. I see these used on time to time on
>>>ebay. You would need a special UV probe to replace the standard
>>>probe that comes with the unit.
>
>
>
>
>Sandy,
>
>
>
>It is not the first time I hear some comments about the UV probe for the
>Metrolux but Redlight does not have any other available different probe
>for this integrator.
>Is it possible to use other probe with this device ? If yes, where can we
>find it? At Olec ?
>
>And which Olec UV integrator do you recommend for a BL tube bank ?
>
>
>Thanks
>
>Kindest regards from Portugal.
>
>Manuel Gomes Teixeira
>Punctum Studios
>Portugal EU


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2.1.5 : 12/17/02-04:47:05 PM Z CST