Re: Poly Toner lots here...

About this list Date view Thread view Subject view Author view

From: Richard Knoppow (dickburk@ix.netcom.com)
Date: 10/02/02-04:20:07 PM Z

----- Original Message -----
From: <ARTHURWG@aol.com>
To: <alt-photo-process-l@sask.usask.ca>
Sent: Tuesday, October 01, 2002 4:03 PM
Subject: Re: Poly Toner lots here...

> <PRE>Thanks for the formulas, Richard. This will be most
helpful to me. But one
> question that must be obvious to others: The two formulas
from the Kodak
> handbook are for stock solutions, right? And these are
diluted 1:3 for use??
> Thanks again. Arthur

  NO, the Kodak formulas are to be used full strength. The
first formula, which I think is pretty close to packaged
Polytoner, is to be diluted. I have the MSDS for Polytoner
somewhere. By memory it does not show ammonium thiosulfate,
which is a primary component of KRST but I will have to find
it to be sure. Its probably still at http://hazard.com if
not on the Kodak site. 

---
Richard Knoppow
Los Angeles, CA, USA
dickburk@ix.netcom.com
About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2.1.5 : 11/14/02-02:40:26 PM Z CST