RE: Another Try at Cyano (digital neg)

About this list Date view Thread view Subject view Author view Attachment view

From: Andrew Epstein (aiepstein@earthlink.net)
Date: 07/10/03-04:10:57 PM Z

I've had very good success printing digital negs for new cyanos using Dan's
2000P platinum curves without any adjustment. I'm printing on Pictorico OHP.

--Andrew

At 09:41 AM 7/10/2003 -0400, you wrote:
>
>
>You said in your message...
>
>>Can you please share your experiences on [digital negatives - cyanotype]
>>combo later? I will try the spectral density negative method - that
>>you've described in your book - this weekend. I prepared a negative on
>>Epson transparency media - will try to build a good working adjustment
>>curve.
>
>The platinum curves gets fairly close for most people on cyanotype. If
>you're using the Epson Transparency film with a dye printer, you almost
>MUST use the spectral density method since that material can't hold much
>ink. The Pictorico OHP is much better.
>
>In other words, start with the platinum curve for your printer and then
>modify as needed.
>
>Good luck!
>
>Dan

About this list Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.5 : 08/07/03-03:34:50 PM Z CST