Ender100@aol.com
Date: 07/28/03-10:44:07 PM Z
Try 360 ppi...it is noticeably better and for negatives, you want the best
you can get....unless you are doing gum, then use 72 ppi...right Judy?
Mark Nelson
In a message dated 7/28/03 8:44:12 PM, dbaird@umflint.edu writes:
> You'll probably always see banding at lower resolutions. The settings
> for Pictorio are photo glossy medium, 2880, and high speed off (if there
> is a microweave setting, it needs to be turned "on"). If you see banding
> at 2880, you need to clean the nozzles. Also, no need to print at final
> image dimensions at a resolution greater than 360 ppi... 240 works as
> well and very few individuals can see any visual difference.
>
This archive was generated by hypermail 2.1.5 : 08/07/03-03:34:51 PM Z CST