Any UV bank can be used with an integrator. Integrator hardware, like
most graphic equipment, is often available on ebay. Olec/Olix is one
of the common brands, but similar instruments made by Olec are also
sold by other names (Fuji, Tenac, etc).
Sandy
>Sandy,
>
>How hard is it to build a UV bank that incorporates an integrator?
>Is the hardware for the integrator readily available and/or
>expensive?
>
>Thanks,
>Mark Nelson
>
>
>In a message dated 2/3/04 12:11:00 PM, sanking@CLEMSON.EDU writes:
>
>>I would recommend a vacuum easel with either the
>>UV bank of MH light, though you might be able to
>>get away with a well adjusted printing frame with
>>the HID lamp because it functions more like a
>>point source. To counter this, you can get fairly
>>decent consistency in exposures with the UV bank
>>without a light integrator. With the platemaker
>>you will get both light integration and vacuum
>>easel built in.
Received on Tue Feb 3 23:58:52 2004
This archive was generated by hypermail 2.1.8 : 03/02/04-11:35:07 AM Z CST