Re: Developing sheet film in open-ended PVC tubes

From: William Laven ^lt;wmlaven@platinotype.com>
Date: 03/31/04-11:34:21 AM Z
Message-id: <p06020440bc90b0c97654@[24.5.66.215]>

yeah, I think it may have been that, too. I had thought View Camera,
but I remember getting Darkroom Techniques for years and they
probably were the source. It was a nice mag. Too bad its gone.

BTW, I do all my film work (and print work with Pt/Pd) in Jobo drums.
While I have a Jobo machine one can use (most of) their drums on a
plain old Beseler rolling agitator. I don't see the advantage of open
tubes in trays (in the dark) if one can easily use tubes in the light
unless there's something I'm missing.

>Oh, I think I know the article you are referring to. I have also seen it
>very long time ago but can't remember either. I think it might be in
>Darkroom Technique (or the name before that), but I thought for
>Bibliography, you only need to cite the original idea rather than the
>variations afterward.
>
>If I come across it I will let you know.
>
>Dave S
>
>----- Original Message -----
>From: "Sandy King" <sanking@clemson.edu>
>To: <alt-photo-process-l@sask.usask.ca>
>Sent: Wednesday, March 31, 2004 12:00 PM
>Subject: Re: Developing sheet film in open-ended PVC tubes
>
>
>> Dave,
>>
>> It was not Phil Davis. Phil introduced the BTZS type tubes in his
>> book Beyond the Zone System but in this type of development the tubes
>> are capped on each end and and development is carried out in a water
>> bath with the lights on.
>>
>> In the article to which I refer the author recommends placing the
>> film in open-ended PVC tubes and then developing the films in a tray
>> containing the developer, with the lights off of course.
>>
>> Sandy
>>
>>
>>
>> >Sandy,
>> >
>> >If I remember correctly, it was Phil Davis. The procedure should be
>> >described in one of his book "Beyond The Zone System." While this is from
>> >memory, I think it is correct since the tubes are also known as BTZS
>> >(abbreviation from the title of the book) tubes.
>> >
>> >Dave S
>> >
>> >----- Original Message -----
>> >From: "Sandy King" <sanking@clemson.edu>
>> >To: <alt-photo-process-l@sask.usask.ca>
>> >Sent: Wednesday, March 31, 2004 11:26 AM
>> >Subject: Developing sheet film in open-ended PVC tubes
>> >
>> >
>> >> A number of years ago someone wrote an article that was published in
>> >> one of the national magazines that described how to develop sheet
>> >> film in open-ended PVC tubes in trays. This procedure offers some
>> >> advantages over normal tray development in that it gives 1) very even
>> >> development with no edge hot spots, and 2) minimizes the possibility
>> >> of scratching that many experience in shuffle agitation.
>> >>
>> >> I am describing this procedure in a current writing project and would
>> >> like to give credit to the person who originally suggested the
>> >> procedure but I am unable to locate it. Can anyone on the list
>> >> provide any details to help me locate the article.
>> >>
>> >> Sandy
>> >>
>> >>
>>
>>
Received on Wed Mar 31 11:33:24 2004

This archive was generated by hypermail 2.1.8 : 04/01/04-02:02:06 PM Z CST