Re: Problem with Ultrafine Clear Film

From: Ender100@aol.com
Date: 05/30/04-10:46:15 AM Z
Message-id: <139.2faade17.2deb69d7@aol.com>

Use Pictorico instead....you won't have these problems.

In a message dated 5/30/04 8:29:40 AM, mklemmer@comcast.net writes:

>
> I printed out another sample with the media rotated 90 degrees, and got an
> identical pattern.  This time I also got a bunch of random ink smears as well.
>
>  
>
> Roller marks seem to be the culprit here.  I then used a wet finger to
> double check that I had printed on the right side.  In the process I noticed that
> the wet finger wiped the printed ink right off the substrate!  Also this
> film it is extremely sensitive to scratching like I've never seen on Pictorico. 
>
>  
>
> Someone double check me that I have the right film here.  I am using
> the Ultrafine Inkjet Crystal Clear 4mil overlay film.  Cat# 758-11172
>
>

Mark Nelson
www.precisiondigitalnegatives.com
Received on Sun May 30 10:46:38 2004

This archive was generated by hypermail 2.1.8 : 06/04/04-01:20:54 PM Z CST