Michael,
If you are using an Epson 2200, and you are using Epson inks and you are
using the right side of the film—are you using Epson Matte Black ink or Epson
Photo Black ink? The Matte Black probably won't work.
Mark Nelson
www.precisiondigitalnegatives.com
In a message dated 5/30/04 8:29:40 AM, mklemmer@comcast.net writes:
>
> I printed out another sample with the media rotated 90 degrees, and got an
> identical pattern. This time I also got a bunch of random ink smears as well.
>
>
>
> Roller marks seem to be the culprit here. I then used a wet finger to
> double check that I had printed on the right side. In the process I noticed that
> the wet finger wiped the printed ink right off the substrate! Also this
> film it is extremely sensitive to scratching like I've never seen on Pictorico.
>
>
>
> Someone double check me that I have the right film here. I am using
> the Ultrafine Inkjet Crystal Clear 4mil overlay film. Cat# 758-11172
>
>
>
>
Received on Sun May 30 10:55:53 2004
This archive was generated by hypermail 2.1.8 : 06/04/04-01:20:54 PM Z CST