RE: GET WHAT YOU PAY FOR

DEAR ERIC,
        Even at 1.3 US $ to the Euro, 68.80 Euros still only totals $90. U.S. for
25 sheets of 20X24. I don't know what shipping and duty would be but, as
you pointed out, it costs $168 here in the U.S. Hmmmmmmmmmm.
                        CHEERS!
                                BOB

 Please check my website: http://www.bobkiss.com/

-----Original Message-----
From: Eric Neilsen [mailto:e.neilsen@worldnet.att.net]
Sent: Friday, November 11, 2005 1:09 PM
To: alt-photo-process-l@sask.usask.ca
Subject: RE: GET WHAT YOU PAY FOR

Somebody is making some money on this. Euro is about .85 to 1 USD. At those
prices one might look into buying from Lotus.

Eric Neilsen Photography
4101 Commerce Street, Suite 9
Dallas, TX 75226
214-827-8301
http://ericneilsenphotography.com

> -----Original Message-----
> From: davidhatton [mailto:davidhatton@superonline.com]
> Sent: Friday, November 11, 2005 10:42 AM
> To: alt-photo-process-l@sask.usask.ca
> Subject: Re: GET WHAT YOU PAY FOR
>
> joachim oppenheimer wrote:
> > The COT paper sounds interesting - do you have more
> descriptive information
> > or where it may be available? Thanks Joachim
> >
> > -----Original Message-----
> > From: BOB KISS [mailto:bobkiss@caribsurf.com]
> > Sent: Friday, November 11, 2005 10:26 AM
> > To: alt-photo-process-l@sask.usask.ca
> > Subject: GET WHAT YOU PAY FOR
> >
> >
> > DEAR LIST,
> > While I often make PT/PD prints on Cranes Platinotype or
> Lennox papers, I
> > have recently made some prints for a show on COT paper.
> Seeing Christian
> > Nze's PT/PD prints on COT last Dec in Paris convinced me to
> try it.
> > While COT is too expensive to use all the time (such as
> first prints, etc.)
> > it certainly fits my preferences in so many ways: better wet
> strength,
> > amazingly smooth surface, great D-max, and it lays flat
> without pressing.
> > Amazing stuff!
> > CHEERS!
> > BOB
> Hi,
> COT 320
>
> http://www.lotusviewcamera.com/filmpaper/pric_ber_2pap_e.html
>
> Regards
>
> david H
> >
>
>
> > Please check my website: http://www.bobkiss.com/
> >
> > -----Original Message-----
> > From: Kai Hamann [mailto:kaihamann@t-online.de]
> > Sent: Friday, November 11, 2005 10:44 AM
> > To: alt-photo-process-l@sask.usask.ca
> > Subject: Re: Signing Your Work
> >
> > Hello Ernesto,
> >
> >
> >>Where would i get a printers mark made?<
> >
> > I bought an Ideal "Model M" pocket seal. Google gives a lot
> of results for
> > this one. You have to provide a black and white design of the
> mark to the
> > stampmaker. It will be scaled and transfered in positive and
> negative levies
> > to the upper and lower blindstamp plate. Just be cautious
> that the embossing
> > area is not too big. Otherwise the stamp doesn´t work with
> heavy paper or
> > could be damaged if too much force is needed.
> >
> > All the best
> > Kai
> >
> >
> >
> >
> >
> >
Received on Fri Nov 11 12:33:22 2005