Re: Gum Application
I generally use about 10ml of combined gum+sensitizer+pigment for
this size.
On Nov 28, 2007, at 5:21 PM, Rajul wrote:
What volume of sensitized emulsion would you need for an
approximately 8 x 10" print with the roller of the type you
describe? I have just got myself a 4" ruler for this size of
prints. Thanks. Rajul
On 28-Nov-07, at 3:34 AM, Clay Harmon wrote:
I use a dense foam roller to apply my gum coats, and they are
smooth to the point of being clinical. The 6 inch white rollers
found at a paint store are the ticket, in my opinion. Just put on
the coating and roll back and forth until it has the smooth
burnished look that used to be so hard to get with brushes.
This is another alternative that may be worth investigating.
Clay
On Nov 27, 2007, at 11:33 PM, Judy Seigel wrote:
On Mon, 26 Nov 2007, Jacek wrote:
I'm having a tough time applying gum on my paper with brushing.
I keep getting streaks. I've read some people use photoflo,
alcohol or everclear to get a smooth consistent coating, do you
use any of these? Anyone use the Richeson 9010 Brushes or Flat
Wash, Badger Softner brushes?
Jacek, If you go to www.alternativephotography.com/books/
js_post_factory.html you'll find Issue #1 of Post-Factory
Photography in its entirety, which you can download as a pdf and
print out for free. Among other "facts, secrets, commentary,"
etc, you'll find Annals of Gum Control: Part One. That's page 8.
But if you go directly to page 10, you'll see the two basic tools
for applying gum emulsion (hake brush & foam applicator),
followed by detailed instructions.
That's not to say, for instance, that Richeson brushes can't do a
splendid job (which I take on faith, never having tried them),
among other strategies, but in my experience with literally
hundreds of space cadet undergraduates (most of them dragged
kicking and screaming into a required course before "alt" was
cool), not to mention my own panicked self-ed in emergency mode
starting from zero, these are the basic tools -- excellent and
very forgiving... also cheap and readily available.
Not to mention very forgiving.
As I recall, someone suggested skip the size (?). All my own
tests showed that's NOT a good strategy. Unless you're applying
size as thick as linoleum, odds are it won't solve the problem,
and in case you need a second coat, not to mention a 3rd or 4th,
you'll be in big trouble. Even if you skip a pre-shrink, wetting
the paper raises the nap and washes off whatever surface size the
manufacturer has applied -- that is, odds are you'll get serious
staining with subsequent coats...
Page 13 by the way shows variations of "bad" and "good" coating
technique. Among other basics rarely mentioned.
PS. My own limited tests with alcohol added showed it's a crock.
Judy
|