Re: for Jeremy and all - everclear source

["danaphoto@sbcglobal.net" <danaphoto@sbcglobal.net>]

Paul,

Everclear, being pure grain alcohol, is sold in liquor stores.  I have purchased it in NV and AZ, but not here in CA where I live.  Also, it would be considered a hazardous substance when it comes to shipping due to its flammability.  Due to the hazardous status, the shipping would probably exceed the cost of a fifth.  So if someone is passing through a state which allows its sale, have them pick one up.  It lasts nearly forever.

Dane


--- On Sat, 10/24/09, Paul Viapiano <viapiano@pacbell..net> wrote:

From: Paul Viapiano <viapiano@pacbell.net>
Subject: for Jeremy and all - everclear source
To: alt-photo-process-l@usask.ca
Date: Saturday, October 24, 2009, 2:33 PM

Jeremy...

I haven't had a need for everclear yet (except for when things don't work out and I need medication)...

But where can it be found...and is it shipped across state lines?

Paul


----- Original Message ----- From: "Jeremy Moore" <jeremydmoore@gmail.com>
To: <alt-photo-process-l@usask.ca>
Sent: Friday, October 23, 2009 3:32 PM
Subject: Re: My own PVA glue sizing experience (attn: marek + the gum woesagain)


> Thanks, Paul, it's just one gum coat on top of the palladium print.
>
> Actually, I have the print in front of me right now and the mixture I
> used coated this 8x10 print and a 6.75" x 12" print using a foam
> roller (the axes image from another alt list email thread about
> ambidextrous coating) was:
>
> 0.2g M. Graham ivory black
> 0.2g Daniel Smith burnt umber
> 0.1g DS Indian Red
> 0.1g Winsor & Newton Perylene Maroon
> 0.1g DS Indian Yellow
> 0.1g DS Terra Verte
>
> 6mL saturated ammonium dichromate
> 6mL gum
> 6 drops everclear
>
> -Jeremy-
>
> On Fri, Oct 23, 2009 at 5:12 PM, Paul Viapiano <viapiano@pacbell.net> wrote:
>> Jeremy...
>>
>> The print is awesome.
>>
>> How many layers of gum...? That color is luscious...
>>
>> Paul
>>
>>
>>
>> ----- Original Message ----- From: "Jeremy Moore" <jeremydmoore@gmail.com>
>> To: <alt-photo-process-l@usask.ca>
>> Sent: Friday, October 23, 2009 3:00 PM
>> Subject: Re: My own PVA glue sizing experience (attn: marek + the gum
>> woesagain)
>>
>>
>>> http://www.flickr.com/photos/jeremymoore/4035656484/
>>>
>>> This is sized with full strength Gamblin PVA Size on BFK Rives and I
>>> have a few more which haven't been scanned. I also pre-shrink this
>>> paper in a warm oxalic acid bath to ready it for the foundation
>>> palladium layer.
>>>
>>> On Fri, Oct 23, 2009 at 4:53 PM, Marek Matusz <marekmatusz@hotmail.com>
>>> wrote:
>>>>
>>>> On the other hand I tested a copule more papers with a 1:1 dilution, BFK
>>>> rives, which looked like a blottong paper, very porous and with a lot of
>>>> tooth (actually I got an email that somebody has been using it for a
>>>> while
>>>> and sizing it with streight form the bottle Gamblin PVA with wonderful
>>>> results).
>>>> Marek
>>
>>