Re: Another PVA question

[Keith Gerling <keith.gerling@gmail.com>]

It was plenty hard when I applied the 2nd layer.  But everything comes off very easily after it goes back into the soak.  Today I used a spray bottle on a third coat - and removed portions of the 1st two coats.

On Sat, Nov 14, 2009 at 10:50 AM, Jack Brubaker <jack@jackbrubaker.com> wrote:

Keith,

Is the gum actually soft when it has soaked in the bath? Or' does it
come off in a sheet where rubbed by the brush? It sounds like you are
saying that the gum looses its hardness or never got very hard on the
PVA.

Jack