Kerik717@aol.com
Tue, 16 Mar 1999 16:36:20 -0500 (EST)
Dick-
> with a clear line running down the width of the print. Developed
> in a Jobo 8x10 drum in pyro.
Is this a Jobo Expert Drum for 8x10 film or is it a Jobo 8x10 Print drum??
I've been rotary processing with Pyro for years and I've never had this happen
in Expert Drums or in my home-made ABS processing tubes.
> I use a Bessler roller and have a devil of a time getting the anti-halation
> layer off, even if I load wet.
You're using a Jobo Expert Drum, correct? How are you loading the film? I
find that if I curl the film into a "C", then load it with the opening of the
"C" facing away from the center of the drum (does that make sense?), then I
have virtually no problems with the film sticking to the drum or any residual
anti-halation dye on the back of the film.
Best,
Kerik
http://www.jps.net/kerik/
This archive was generated by hypermail 2.0b3 on Sat Nov 06 1999 - 10:09:03