Re: Rotation on Jobo --- Re: Info On Jobo Drums

Date view Thread view Subject view Author view

From: Rod Fleming (rodfleming@sol.co.uk)
Date: 11/01/00-08:30:35 AM Z

David,

There's a three fingered switch arrangement on the CPE2 which controls the
rotation. You might like to check that it's still working.

I agree wholeheartedly about the design and build quality of Jobo
processors, however.

Rod
----- Original Message -----
From: "Nash Computer Technology" <nashcom@btinternet.com>
To: <jon@jonlong.com>; <alt-photo-process-l@skyway.usask.ca>
Sent: Wednesday, November 01, 2000 2:17 PM
Subject: Re: Rotation on Jobo --- Re: Info On Jobo Drums

> I have a Jobo CPE2 processor, and this has developed a similar fault.
> Sometimes, after I have used it for a while (long enough to do a 5min
> presoak and 8 minute development), the motor seems to slow down in one
> direction. It looks as though each rotation is on a timer, as opposed to
a
> revolution counter, so if the motor turns slowly in one direction, the
drum
> is rotated less within the given time.
>
> In my case, this can be very noticeable, but it could be happening with
> yours on a lesser scale.
>
> I must say that the design and build quality of Jobos leaves a lot to be
> desired. So much for German engineering.
>
> David Nash
>
> ----- Original Message -----
> From: "Jon" <fotonerd@yahoo.com>
> To: <alt-photo-process-l@sask.usask.ca>
> Sent: 01 November 2000 01:46
> Subject: Rotation on Jobo --- Re: Info On Jobo Drums
>
>
> >
> > Interesting tid-bit I have noticed on my Alt 2 Processor. It rotates
> > slightly more (or less) then 2 rotations in one direction and slightly
> > more(or less) then 3 in the other. I am guessing on this but have
noticed
> > it definitly rotates more in one direction. My guess is so not one
section
> > of the tube, regardless of the tube used, is not consistantly peaking
out
> > at the top on the rotation. I noticed this because the lable on the side
> > is never in the same spot when it reverses direction. Make sense?
> >
> > Anyways....
> >
> > Jon
> > jon@jonlong.com
> >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > >From homework help to love advice, Yahoo! Experts has your answer.
> > http://experts.yahoo.com/
> >
>
>

Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 12/01/00-11:46:54 AM Z CST