Re: slightly off topic-gitzo screw

Date view Thread view Subject view Author view

From: Philippe Ayral (payral@club-internet.fr)
Date: 07/03/01-07:03:44 AM Z


May I suggest one thing: as Gitzo is a French product, the screw size or
thread is on the metric side.
But it's always possible to get spare parts from Gitzo even for the oldest
tripod.
Let's try : http://www.gitzo.com/

Gumprint@aol.com wrote:

> I have misplaced in the world one of 2 hex screws on my Gitzo MK2 head. It
> comes from the piece that holds the quick plate release in place. I cannot
> find a replacement in hardware stores, camera repair tells me Gitzo won't
> supply them.
>
> My best guess is that it is a allen machine head, 3mm shaft with .75 thread
> pitch
>
> I would welcome your input...my 57 is unusable without the tripod.
> TIA Carole

--
Ayral Philippe
52, rue de Vallard
74240 Gaillard
France
Tél/Fax: +33 (0)450 39 79 81
http://www.focale.ch


Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 08/02/01-11:56:46 AM Z CST