Re: tray processing vs jobo

Date view Thread view Subject view Author view

From: Pam Niedermayer (pam_pine@cape.com)
Date: 07/20/01-12:50:57 PM Z


Seems that another trick would be maintaining processing temperature,
obviously no problem at room temp, but...

Pam

Kerik717@aol.com wrote:
>
> Shannon,
>
> Go for the Jobo Expert drum, but don't bother with the Jobo processor. You can pick up a Beseler Motor base (or similar) used for $50 or less. (Here's one on ebay right now: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1255749695.) The drum will be ~$250, but worth every penney. The only "trick" is filling the drum. I just use a large funnel and attached flexible tubing to it (Tygon, I think). Place the drum on the motor base (turning), hold the funnel with the hose attached so the hose is in the end of the drum, then pour the chemicals from a pitcher/beaker into the funnel. It's easy and it works very well!
>
> Kerik Kouklis
> www.Kerik.com

-- 
Pamela G. Niedermayer
Pinehill Softworks Inc.
600 W. 28th St., Suite 103
Austin, TX 78705
512-236-1677
http://www.pinehill.com


Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 08/02/01-11:56:46 AM Z CST