From: Peter Howey (stimpy@interwebasp.net)
Date: 05/08/01-07:38:50 AM Z
I use Novacan Black Patina from the local stained glass store. It's $2 for
8 ounces and does the job nicely.
Peter
Bay City, MI
----- Original Message -----
From: "Nash Computer Technology" <nashcom@btinternet.com>
To: "Alt Photo" <alt-photo-process-l@sask.usask.ca>
Sent: Tuesday, May 08, 2001 9:32 AM
Subject: Chemistry advice
> Hi
>
> I've read some old journals on making pinholes, and they seem to suggest
> using brass or silver sheet. I've made a couple in very thin brass sheet,
> and now need to 'blacken' the inside edges of the pinhole. In the old
> journals (1900-ish) they suggested leaving the brass in a mixture of
dilute
> hydrochloric acid and sodium thiosulphate.
>
> I bought some 10% solution hydochloric acid and poured out about 100ml
into
> a glass jar. I then added a small amount of sodium thiosulphate (less
than
> one quarter teaspoon). When I drop in the pinhole, the brass starts to
> darken. After about 10 minutes it appears to have a black-ish coating
that
> can flake off if handled too aggresively such as when trying to pick it up
> with a teaspoon. The first one I left in too long, and ended up with more
> holes than the original pinhole... Although it seems to do the trick, the
> brass appears to end up with a rougher texture, although the edge of the
> pinhole seems smooth enough.
>
> I just wondered if anyone knew of a better way to make blacken brass, or
if
> I need to modify my technique.
>
> For those who worry about these things, I've been wearing a 3M rubber face
> mask, goggles and gloves, and working outdoors.
>
>
>
>
This archive was generated by hypermail 2b30 : 07/12/01-11:29:39 AM Z CST