Re: visualizing; mixing D-76

About this list Date view Thread view Subject view Author view

From: Carl Weese (cweese@earthlink.net)
Date: 12/15/02-02:33:53 PM Z


Shannon,

Should be no difference between 4x5 held at 6" and 8x10 held at 12". The
card framing device may be helpful to learn how to anticipate framing but I
think you're better off just getting used to what your lenses frame,
internalizing it. Also, camera position is the important thing, lens
selection is dependent upon that. First find the place you need to stand to
see your subect right, then pick the lens that frames what interests you
from that place. If the 12" takes in too much, you need something longer. If
it takes in too little, you need something shorter. If you change your
camera position to suit the lens, the tail is wagging the dog.---Carl

--
        web site with picture galleries
        and workshop information at:
        http://home.earthlink.net/~cweese/
----------
>From: Shannon Stoney <shannonstoney@earthlink.net>
>To: alt-photo-process-l@sask.usask.ca
>Subject: visualizing; mixing D-76
>Date: Sun, Dec 15, 2002, 4:07 PM
>
> Today I played with a little home-made visualizing device made out of a
> piece of cardboard with a 4x5 opening cut into it. Really I am shooting 8x10
> but I thought the smaller hole would be easier to carry around.  But, it was
> confusing.  I forgot at first that you have to hold it the right distance
> from your eyes to simulate the focal length of your lens; so I kept
> "finding" little scenes that I couldn't actually shoot.  I guess I would
> have needed a telephoto lens.  Now I am wondering if I need to make an 8x10
> hole to carry around and hold it exactly 12" from my face?  Or will the 4x5
> one work if I hold it the right distance, ie about 6 inches?  I have heard
> of people using these sorts of devices, but I'm not sure I'm doing it in the
> most helpful way.  If you use one, I'd like to know how you use it and if
> you find it helpful.
>
>  Do people ever
> shoot landscapes with telephoto lenses?  If not, why not?
>
> Also, here is a question about mixing film developer, D-76 to be exact.
> Does it harm the developer if you heat the water to a higher temperature
> than the directions specify?  Yesterday I poured the powder into almost
> boiling water, and then  I thought. whoops, maybe that wasn't a good idea.
>
> --shannon

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2.1.5 : 01/31/03-09:31:25 AM Z CST