From: Kemal Delic (deli@swipnet.se)
Date: 02/12/02-12:49:56 PM Z
Your printer says that the ink waste pads are full, they need
to be changed. If you reset the printer without changing the
pads the main circuit board can be flooded. Talk to an another
Epson tech.
Kemal
---------------------------------------------------------
John Campbell wrote:
>
> Greetings all—
>
> I am in fairly desperate travail over a new problem with my Epson 3000. If
> any of you out there have experienced something similar, I would appreciate
> any info you can provide.
>
> Here are the symptoms:
>
> I switched out cartridges with a thorough flushing in between—something I’ve
> done numerous times. This time, however, when I started her back up, all the
> panel lights came on (flashing, with the exception of the Ink Out lights,
> which remained constant). Several repetitions of off/on (including m
This archive was generated by hypermail 2b30 : 03/08/02-09:45:21 AM Z CST