Re: Inkjet transparencies for Pt/Pd and Cyanotype

Date view Thread view Subject view Author view

FDanB@aol.com
Date: 03/09/02-10:52:26 AM Z


You said in your message...

>Is it possible at the present time to make negatives of this type,
>spectral or otherwise, on the 2000P that will provide results similar
>or equal to the output from an Imagesetter?

Sandy,

You'll find a "prototype" platinum curve for the 2000P on my site. The
direct address is as follows:

http://danburkholder.com/Pages/misc_pages/inkjetneg.htm

I only had brief test time with the 2000P, hence the prototype
designation for this curve. This curve is for printing neutral, six-color
negs, not for the orange, colorized version (though that method deserves
exploration on the 2000P).

For hand-coated printing, you might be very pleased with the results from
the 2000P. For silver gelatin contact printing, I think imagesetter negs
still have a quality advantage.

Hope this helps,

Dan


Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 04/10/02-09:28:54 AM Z CST