Re: paper and film testing

About this list Date view Thread view Subject view Author view

sstoney@pdq.net
Date: 10/14/02-07:56:48 PM Z


Sandy wrote:
>
>
> I find it odd that the EFS would be 250 regardless of time of
> development. In looking at several different tests I have done with
> TRI-X, when the choses DR is set to 1.4 (close to your 1.38 for AZO) I
> get approximately the following results, which are something of an
> average I got in tests with HC-110 1:20, Pyrocat 2:2:100, and ABC+
> 1:1:50.
>
> SBR 10 EFS 100
> SBR 9 EFS 160
> SBR 8 EFS 250
> SBR 7 EFS 320
> SBR 6 EFS 400
> SBR 5 EFS 500

Your numbers are more along the lines of what I expected. Maybe I should
run my numbers through the Plotter program myself so I'll understand this
better. I tried to use the old Mac version today but I couldn't get it to
work. Is there any way I can judge the ISOs myself based on the curves I
got back? I think there is a little triangle thing that you make and
place on the curves in a certain way, and then you put a ruler under the
curves and draw lines down to the ruler and find your ISO that way?

--shannon
>
> Sandy
>
>
>
>
> --


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2.1.5 : 11/14/02-02:40:26 PM Z CST