Re: Achieving detail with gum

About this list Date view Thread view Subject view Author view

From: ericawd (ericawd@mem.quik.com)
Date: 09/14/02-07:15:12 AM Z


And what was the source of the original camera neg./pos.? 4x5? 2 1/4? 35mm?
other?

C. Spearman

----- Original Message -----
From: "Keith Gerling" <keithgerling@att.net>
To: "Alt-Photo-Process-L" <alt-photo-process-l@skyway.usask.ca>
Sent: Thursday, September 12, 2002 9:58 AM
Subject: Achieving detail with gum

> There was some discussion recently concerning detail in gum printing.
I've
> figured out the trick to maximizing detail: make the prints big! Here are
> two links to jpeg captures of a recent project.
>
> Gum on Aluminum (4 coats for the top panel, 6 for the bottom panel)
>
> First the complete work, which is a diptych measuring 72"x30":
> http://s16v.com/keith/teddy.jpg
>
> Here is a detail shot of an area measuring 8.5"x11.5":
> http://s16v.com/keith/teddy%20detail.jpg
>
> Thanks for looking,
>
> Keith
>
>
>


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2.1.5 : 10/01/02-03:47:09 PM Z CST