RE: Homemade vacuum frame (was: contact printing frames)

About this list Date view Thread view Subject view Author view Attachment view

From: Vincent Dobson (manitec@bellsouth.net)
Date: 07/08/03-08:30:34 AM Z

<:)-----Original Message-----
<:)From: Dave Rose [mailto:cactuscowboy@bresnan.net]
<:)Sent: Tuesday, July 08, 2003 10:09 AM
<:)To: Alt Photo List
<:)Subject: Homemade vacuum frame (was: contact printing frames)
<:)
<:)
<:)My vacuum frame was constructed using a 20x24" sheet of 3/4"
<:)plywood <:)

Great - looks like either your method or the rubber blanket method would
work and be easy to build.

It looks like you would not be able to view progress on half the print
(without losing registration) with either method.

Vince Dobson
Visions In Nature
www.VisionsInNature.com

About this list Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.5 : 08/07/03-03:34:49 PM Z CST