Re: Roller marks on output

ya definately. thanks.

I haven't seen a problem yet on anything except this UCF film. You know the
ink was still wet on the film more then a day after it was printed. hmm.

----- Original Message -----
From: "Robert" <rc3@flash.net>
To: <alt-photo-process-l@sask.usask.ca>
Sent: Thursday, June 03, 2004 11:15 PM
Subject: RE: Roller marks on output

> Mis Inks makes a set of plastic roller holders to cure the problem on the
> 2200. A couple bucks for the set. Listed in their accessory page.
> http://www.inksupply.com/index.cfm?source=html/2200wh.html
>
> Best Regards,
> Robert
> -----Original Message-----
> From: Mike Klemmer [mailto:mklemmer@comcast.net]
> Sent: Thursday, June 03, 2004 7:38 PM
> To: alt-photo-process-l@sask.usask.ca
> Subject: Re: Roller marks on output
>
>
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14303&item=3484918722
> &rd=1&ssPageName=WDVW
>
> ----- Original Message -----
> From: "Don Bryant" <dstevenbryant@mindspring.com>
> To: <alt-photo-process-l@sask.usask.ca>
> Sent: Thursday, June 03, 2004 8:34 PM
> Subject: RE: Roller marks on output
>
>
> > Mike,
> >
> >
> > >
> > > There's a guy on Ebay who sells a fix for the 2200 roller wheel
problem
> > > that
> > > you could try. I have no idea if it works or not.
> >
> > Do you have a link?
> >
> > Thanks,
> >
> > Don Bryant
> >
> >
>
>
>
Received on Thu Jun 3 21:28:27 2004