RE: Roller marks on output

Robert,

Well isn't that interesting. Looks like you could just make your own too!

Thanks,

Don

> -----Original Message-----
> From: Robert [mailto:rc3@flash.net]
> Sent: Friday, June 04, 2004 1:16 AM
> To: alt-photo-process-l@sask.usask.ca
> Subject: RE: Roller marks on output
>
> Mis Inks makes a set of plastic roller holders to cure the problem on the
> 2200. A couple bucks for the set. Listed in their accessory page.
> http://www.inksupply.com/index.cfm?source=html/2200wh.html
>
> Best Regards,
> Robert
> -----Original Message-----
> From: Mike Klemmer [mailto:mklemmer@comcast.net]
> Sent: Thursday, June 03, 2004 7:38 PM
> To: alt-photo-process-l@sask.usask.ca
> Subject: Re: Roller marks on output
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14303&item=34849187
> 22
> &rd=1&ssPageName=WDVW
>
> ----- Original Message -----
> From: "Don Bryant" <dstevenbryant@mindspring.com>
> To: <alt-photo-process-l@sask.usask.ca>
> Sent: Thursday, June 03, 2004 8:34 PM
> Subject: RE: Roller marks on output
>
>
> > Mike,
> >
> >
> > >
> > > There's a guy on Ebay who sells a fix for the 2200 roller wheel
> problem
> > > that
> > > you could try. I have no idea if it works or not.
> >
> > Do you have a link?
> >
> > Thanks,
> >
> > Don Bryant
> >
> >
>
>
Received on Thu Jun 3 21:31:45 2004