Re:Selenium-toning Van Dyke Brown prints
Sandy,
toning with gold after selenium cools and clears highlights a bit and kills
highlights yellowing you mentioned.
Regards
Stane
----- Original Message -----
From: "Sandy King" <sanking@clemson.edu>
To: <alt-photo-process-l@usask.ca>
Sent: Tuesday, September 26, 2006 4:29 PM
Subject: [SPAM] Re: Selenium-toning Van Dyke Brown prints
Toning after fixing and a long final wash is the
*only* way I would consider using selenium with
VDB. Selenium reacts readily with any soluble
silver salts left in the print after development
and this causes staining. This is the reason for
the yellow or yellow-pink color. If you want nice
clean highlights with VDB the only way to get
them IMO with selenium toning is to fix the print
and thoroughly wash it before toning. Not just a
wash of 5-10 minutes, but a very thorough wash.
Sandy
Interesting to hear everyone's experiences. I used a much weaker solution
of KRST (I would estimate around 1:500) and toned /after/ fixing, for about
1-2 minutes. The colour change is not huge, but very noticeable. After
re-examining my KRST-toned prints last night, I can see a bit of a yellow
hue emerging in the highlights (though not much), but more significantly,
the heavy red cast of untoned VDBs is gone and replaced with a more neutral
brown.
I haven't tried gold/thiourea toning (I was reluctant to cough up the dough
for gold chloride -- though after seeing Loris' scans, I think I will try)
but I prefer the colour of my KRST-toned VDBs to untoned VDBs.
Jordan
Loris Medici wrote:
Camden, add me to the list... I absolutely didn't like the (yellowish)
color
I got from Selenium toned (1:200) Vandykes. I prefer better the original
unaltered color OR the color I get after gold/thiourea toning.
Regards,
Loris.
-----Original Message-----
From: Camden Hardy [mailto:camden@hardyphotography.net] Sent: 25 Eylül
2006 Pazartesi 18:42
To: alt-photo-process-l@usask.ca
Subject: Re: Selenium-toning Van Dyke Brown prints
Jordan,
I've toned VDBs in Kodak's Selenium before, and I was actually quite
disappointed. I guess I just prefer the untoned colors for my VDB prints.
Camden Hardy
camden[at]hardyphotography[dot]net
http://www.hardyphotography.net
On Mon, September 25, 2006 9:06 am, Jordan Wosnick wrote:
Hi everyone,
I would be interested in hearing from people who selenium-tone their VDB
prints.
I was prepared to be disappointed when I tried it (based on Wynn White's
article on Unblinkingeye and posts on APUG) but was actually quite
pleased. I used a tiny amount of Kodak Rapid Selenium Toner (literally a
few drops in a tray of water) and toned after fixing. The colour change
began almost immediately and eliminated the somewhat sickly reddish-brown
of the VDB, pushing it much closer to a warm gray-brown.
Based on what I had read, I was expecting a huge amount of image
reduction, but I didn't see much at all.
Anyone else tone their VDBs in KRST?
Thanks
Jordan
--
Jordan Wosnick
jwosnick@fastmail.fm
--
Jordan Wosnick
jwosnick@fastmail.fm
Content-Type: text/plain; name="SpamAssassinReport.txt"
Content-Disposition: inline; filename="SpamAssassinReport.txt"
Content-Transfer-Encoding: 7bit
MIME-Version: 1.0
X-Mailer: MIME-tools 5.417 (Entity 5.417)
Spam detection software, running on the system "mx4.clemson.edu", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
postmaster@clemson.edu for details.
Content preview: Interesting to hear everyone's experiences. I used a
much weaker solution of KRST (I would estimate around 1:500) and toned
/after/ fixing, for about 1-2 minutes. The colour change is not huge,
but very noticeable. After re-examining my KRST-toned prints last night,
I can see a bit of a yellow hue emerging in the highlights (though not
much), but more significantly, the heavy red cast of untoned VDBs is
gone and replaced with a more neutral brown. [...]
Content analysis details: (5.2 points, 5.0 required)
pts rule name description
---- ---------------------- --------------------------------------------------
0.2 MR_NOT_ATTRIBUTED_IP Beta rule: an non-attributed IPv4 found in
headers
0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay
lines
1.0 MR_DIFF_MID MR_DIFF_MID
2.0 NO_RDNS2 Sending MTA has no reverse DNS
2.0 RATWR10_MESSID Message-ID has ratware pattern
(HEXHEX.HEXHEX@)
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.9/456 - Release Date: 25.9.2006