RE: Epson 3800 vs 4800 - any advice?
Hi Sandy,
Which blending mode should one use to achieve this (is it multiply +
opacity)? I have problems with the 3rd party inks I use for my 1290
(the distributor is out of stock since December). With the new 3rd
party inks, I can get only log 2.0 DR with G255 + B10 and that's Li
based POP Pd + 1 drop of 1.25% AD per ml of coating solution! I'd like
to use a much lower contrast emulsion (without contrast agent) for
smoother tones (the DR my usual coating mix is around log 2.8 - 2.9)...
Thanks in advance,
Loris.
Quoting Sandy King <sanking@clemson.edu>:
I believe it is about log 2.3. That is, if you print an RGB negative
using all of the inks, that is what you get, or close to it.
If you want to add some black to one of th PDN colors, just make
another 360 ppi layer of the step tablet, fill it with black, and then
blend with the colored layer to give you however much density you need.
With the Epson 2200 virtually any maximum density is possible, from the
2.00 or so with Green by itself, to around 3.8 or so with black.
You won't have as much range with the 3800, however.
Sandy
At 11:54 AM -0700 2/28/07, Camden Hardy wrote:
Hi Mark,
So you (or anyone else) happen to know the density of all inks on the 4800?
Camden Hardy
camden[at]hardyphotography[dot]net
http://www.hardyphotography.net
From: Ender100@aol.com [mailto:Ender100@aol.com]
Sent: Wednesday, February 28, 2007 11:40 AM
To: alt-photo-process-l@usask.ca
Subject: Re: Epson 3800 vs 4800 - any advice?
Camden,
The 2200 and the X600 series large format printers used the inital
Ultrachrome inkset-the black ink is indeed very dense to UV....
slightly over Log 4.0..... just about like Kodalith!
Best Wishes,
Mark Nelson
<http://www.precisiondigitalnegatives.com/>Precision Digital
Negatives - The System
<http://groups.yahoo.com/group/PDNPrint/>PDNPrint Forum at Yahoo Groups
<http://www.markinelsonphoto.com/>www.MarkINelsonPhoto.com
In a message dated 2/28/07 10:54:20 AM, camden@hardyphotography.net writes:
In terms of black ink only, the 2200 is the best I've seen, and you may
not find a printer that can stand up to the 2200 (can anyone confirm/deny
this?). Based on what I've seen and heard, the 2200 is one of the best
out there for black ink.
**************************************
AOL now offers free email to everyone. Find out more about what's
free from AOL at http://www.aol.com.
|