Kerik717@aol.com
Date: 07/22/01-03:00:14 PM Z
> I would recommend that one use film drums over
> home-made tubes because it is really difficult to snap an end-cap[
> off the the 3-4" diameter tubes you would need for 8X10, 11X14 and
> larger film.
I use soft rubber caps that are made for the ABS pipe. Easy to remove from
any size pipe. I got them at a Home Depot-like store where I buy 3" and 4"
diameter ABS pipe to make the tubes. Cost for one 7x17 processing tube with
rubber caps is about $7. Very cheap!
Kerik
This archive was generated by hypermail 2b30 : 08/02/01-11:56:47 AM Z CST