Re: Pyro in tanks

Date view Thread view Subject view Author view

From: Nash Computer Technology (nashcom@btinternet.com)
Date: 09/29/01-03:56:51 PM Z

Hi Carl

Do you have the formula for the PMK pyro? I've been using Rollo Pyro so far,
but I've bought some PMK and it cost about $15 (here in the UK) for
10-litres, which seems quite expensive for a one-shot developer.

Thanks for your help.

David
----- Original Message -----
From: "Carl Weese" <cweese@earthlink.net>
To: <alt-photo-process-l@sask.usask.ca>
Sent: 28 September 2001 14:18
Subject: Re: Pyro in tanks

> David,
>
> Tray and rotary development both work so well with PMK pyro it's difficult
> to see a reason to use deep tanks. It's an inexpensive developer if you
mix
> it yourself so seven liters won't break the bank, but I routinely do 8
8x10
> films at a time in 3 liters with 11x14 inch trays. Both economical and
> efficient. ---Carl

Date view Thread view Subject view Author view

This archive was generated by hypermail 2b30 : 10/01/01-01:41:32 PM Z CST