Re: Snow in South Carolina, was Re: precipitation of dichromates

Last month, January 29 Saskatchewan was the coldest place on earth at
-52.3 C (thats -62 F) it felt a little colder, there was a wind. - I think
it also snowed :)

What did we do? We went to work and the kids had school.

Maybe when it gets above freezing everything will shut down. We might all
forget to take off our overcoats and suffer from heat exhaustion.

Gord

Small Saskatchewan community the coldest place on Earth yesterday at
-52.3C

Key Lake, Sask., was the coldest place on the planet yesterday, with a
temperature reading that dipped to -52.3C, not including the windchill,
according to Environment Canada's experts on ice and...
 Source: CanWest News Service

On Thu, 26 Feb 2004, Sandy King wrote:

> Chris,
>
> When it snows in South Carolina, even an inch or so, school is
> cancelled, regardless of what the administrations says or does!! It
> is called self-cancel, carried out by the students with a compliant
> faculty. Seriously, no way I am going to leave the comfort and safety
> of up home and venture out on the roads around here when there is
> snow. That would be like playing demolition derby.
>
> But the great thing about snow here is that it goes away quickly. The
> forecast is calling for up to eight inches or more of snow here today
> and tonight, but up to the high 60s by the weekend.
>
> Now forgot about your classes and pretend that you are Ansel in Yosemite.
>
> Sandy
>
>
>
>
>
> >Thanks, Marek.
> >
> >Why would pot di be insoluble in alcohol and am di not? If this is too
> >complex an answer, don't bother...I'm just interested.
> >
> >In the old BJPs it was talking about the two at a time when pot di was the
> >norm, and how pot di, because it is so low in saturation compared to am di
> >(10 vs 30%), with a drop in room temp you tend to get crystallization around
> >the bottle stopper all the time. That's always plagued me, too, in a
> >inconsequential but messy way with using saturated solutions, so I thought
> >that'd be another goood reason to use am di at lower than saturation point.
> >And then I came across this alcohol statement and was wondering.
> >
> >Can't believe it--it is SNOWING here in SC. Looks like MT outside....I'm
> >waiting to see if school is cancelled. In MT it'd have to be 2 feet of snow
> >and 30 below zero before they'd consider closing anything.
> >Chris
> >----- Original Message -----
> >From: <mmatusz@pdq.net>
> >To: <alt-photo-process-l@sask.usask.ca>
> >Sent: Tuesday, February 24, 2004 1:36 PM
> >Subject: Re: precipitation of dichromates
> >
> >
> >> Chris,
> >> Potassium dichromate is insoluble in alcohol, ammonium dichromate is
> >> soluble, although I do not have the exact solubility numbers. You gum
> >> solution is mostly water anyway. If you like to print with concentrated
> >> dicromate solutions (around 15% in the final solution or even higher)then
> >> it is likely that you can not add a lot of alcohol, or else potassium
> >> dichromate will precipiate. Again the alcohol addition is also small,
> >> maybe 5%. If you are printing with a dilute dichromte solution you might
> >> not have a problem with potasssium dichromate and alcohol. This is one of
> >> those things that it is so much easier to test in practice anyway.
> >> Happy printing
> >> Marek Matusz, Houston
> >>
> >> > Do any of you chemists out there know why potassium dichromate would
> >> > precipitate out of solution when alcohol is added vs. ammonium
> >dichromate
> >> > which doesn't? Could it just be potassium's lower saturation point
> >that
> >> > makes it seem that way or is there a property of alcohol that makes a
> >> > potassium form do this whereas an ammonium form doesn't? Or is this even
> >> > true in your observations, and from a practical standpoint, at what
> >point?
> >> > Any conjecture would be appreciated.
> >> >
> >> > My reason for asking this is just thinking about the addition of alcohol
> >> > in
> >> > a coating solution in gum printing that has been suggested in the past,
> >to
> >> > make it thinner and easier to coat, whether this is viable with
> >potassium
> >> > dichromate.
> >> > Chris
> >> >
> >> >
> >> >
> >>
>

---------------------------------------------------------
Gordon J. Holtslander Dept. of Biology
holtsg@duke.usask.ca 112 Science Place
http://duke.usask.ca/~holtsg University of Saskatchewan
Tel (306) 966-4433 Saskatoon, Saskatchewan
Fax (306) 966-4461 Canada S7N 5E2
---------------------------------------------------------
Received on Thu Feb 26 12:11:08 2004